stephanieb
Neware Equipment information label
①CT-4008T-5V20mA-164 CT-8004-5V100A-N A T F 1 2 3 4 5 6 7 8 9 1: T-4 means BTS4000,Neware 4 series; T-8 means BTS8000, Neware 8
Change the language of Neware software
How to change the language in Neware software from Chinese to English. Please look at the video For more information, please contact me at jessie@newarebattery.com
Unit setting of Neware software
How to change the unit of current, voltage, time, etc in software according to your real needs? Operation guidance: —-Client Software 1. Select any channel and right click, choose “Unit Setting”. 2. Select “Unit setting” and “Applied To All Device”. 3. Choose the unit you want. And click “OK”. Then in the main window and testing window, the unit will
The current is 0mA/ A in Excel data?
Problem describe: When you export your data to Excel, you find that the current is quite different from real current in constant charge period, and some time it is even 0Ah. But in BTSDA, the currents shows normally, why will it happen and how to solve it? Please follow me. That’s because the data in BTSDA will show four digits
How to solve the incomplete download data
Problem details: When you open your NDA data of one channel, the data is incomplete because of some reason. What you can do to view the complete data. There are two methods to solve this problem. Method 1: Click the blue letters and open the NDA data store folder. Delete original data file. Then view the data again, if the
Cycle life test
Cycle life test is one of the basic tests which Neware battery tester (BTS3000, BTS4000, BTS5000, BTS6000, BTS7000, BTS8000, BTS9000) can support. Following example for your reference. Battery model: Li-ion 18650, 2000mAh, 3.7V Principle of battery cycle life test: For example, the nominal charge and discharge cycle shall be “no less than 80% of the nominal capacity after 500 cycles”.
change the unit ID of NEWARE BTS3000
Notes：Please stop all devices which connect your computer before installing the unit ID change software, then close NEWARE client testing software . Finally cut off the power of all your devices. 1. Decompress the file “BTS_Cali_7.1.23”, Then you can see these documents in the file. 2. Click “NwCal”to open it. 3. If the language of software is
Change tester unit ID( 4000 series)
A control unit can support 80 channels and does not change its frequency. But under a control unit, an unit ID only can be use in a tester. So different tester has different ID. When you purchase a new tester and the unit ID is the same as your old one, how to change it. Please follow me. 1. Connect
DCIR Test
There are two kinds of test operation to test the battery DCIR–Pulse DCIR test and Step DCIR test. Pulse DCIR test operation Operation standard of pulse DCIR test: At 0.2C working current the battery works 10s, and at 1C battery works 1s. The following operation is a pulse DCIR test based on 3V-4.2V working voltage and 2.9Ah capacity battery.
Recent Comments