May 2020
Copy data
Right click the data and select “Copy”, there are three choices for you. Choose one according to your needs. Then you can paste the data anywhere. Crtl + click to choose multiple data.
View test log on BTSDA
How to get the test information and situation when you open the NDA data file on BTSDA? What you can get in the test log? Click this article and show you the operation Right click any data area and select “ Log”.
Channel mapping
After installing our software and finishing connection, so you begin to your test. But how to operate, why there is nothing on the main window. Today i would like to map the channels on our BTSClient software. Want to know how to operate it, please just follow me. 1. Find and click your tester in the device list, right click
Pulse test
Necessary Software：(For pulse test, BuildTest software is necessary.) (Suppose we are using 5V6A tester) 1. Check the voltage and current range of tester We must check the voltage and current range of tester before editing the steps. 1) Right click any channel on BTS7.6.0 , and choose “Channel Info”. You can see the voltage range and current range here.
Data review types
In detailed data record area, there are three kinds of data display form: Cycle layer, Step layer and record layer. What’s more, at different layer, the information and parameters for displaying you can select are different. Cycle layer: Step layer: Record layer: How to operate it, please watch the following video.
change channel color codes
Any channel that is in one of these conditions will be displayed in a color corresponding to the color code. The default color codes: Green is charge; Red is discharge; Yellow is rest. The color codes can be modified to display the work step of channels, the light color of the tester (low machine) is the same as the color
How to customize curves/plots and report in BTSDA
You can customize the curves/plots you want in our BTSDA software. I’ ll give an example of the method about getting Time- current & voltage curve for you. You can get other kind of curves/plots by the same way. Following screenshot is a typical NDA(Neware data analyzer) file opened in our software BTSDA. And let’s use following steps to create/customize a
Show only detailed data or curves in BTSDA
When you open your NDA file on BTSDA, there are always data and curves report together on the window . How can you make only data or curves display? Below instructions may help you. ( Introduction of BTSDA window) 1. Click the left arrow button , the splitter will move to left
Display a part of cycle data
After finishing cycle testing, sometimes you only need a part of cycle data for analysis. And sometimes, when there are so many cycles, BTSDA software will only show part of the latest 20 cycles(to speed up the opening of the data). How to view more or less cycles in BTSDA for different purpose? Step 1: Open you NDA data. Step
Recent Comments